pptpd安装脚本

脚本网上找的，32位系统适用，内容如下

#! /bin/sh

#

### BEGIN INIT INFO

# Provides: pptpd instll

# PowerBY: fireye

# website: http//www.hichou.com www.qinday.com

# Description: pptpd install for centos vps

### END INIT INFO

#

 

yum remove -y pptpd ppp

iptables –flush POSTROUTING –table nat

iptables –flush FORWARD

rm -rf /etc/pptpd.conf

rm -rf /etc/ppp

 

wget http://packages.sw.be/dkms/dkms-2.1.1.2-1.el5.rf.noarch.rpm

wget “http://nchc.dl.sourceforge.net/project/poptop/mppe%20module%20builder/kernel_ppp_mppe-1.0.2%20dkms-2.0.6/kernel_ppp_mppe-1.0.2-3dkms.noarch.rpm”

wget http://www.diahosting.com/dload/pptpd-1.3.4-1.rhel5.1.i386.rpm

wget ftp://ftp.ntua.gr/pub/net/poptop/OldFiles/pptpd-1.1.3-1.i386.rpm

wget http://mirrors.163.com/centos/5.6/os/i386/CentOS/ppp-2.4.4-2.el5.i386.rpm

 

yum -y install make libpcap iptables gcc-c++ logrotate tar cpio perl pam tcp_wrappers

rpm -ivh dkms-2.1.1.2-1.el5.rf.noarch.rpm

rpm -ivh kernel_ppp_mppe-1.0.2-3dkms.noarch.rpm

rpm -qa kernel_ppp_mppe

rpm -Uvh ppp-2.4.4-2.el5.i386.rpm

rpm -ivh pptpd-1.3.4-1.rhel5.1.i386.rpm

 

mknod /dev/ppp c 108 0

echo 1 > /proc/sys/net/ipv4/ip_forward

echo “mknod /dev/ppp c 108 0″ >> /etc/rc.local

echo “echo 1 > /proc/sys/net/ipv4/ip_forward” >> /etc/rc.local

echo “localip 172.16.36.1″ >> /etc/pptpd.conf

echo “remoteip 172.16.36.2-254″ >> /etc/pptpd.conf

echo “ms-dns 8.8.8.8″ >> /etc/ppp/options.pptpd

echo “ms-dns 8.8.4.4″ >> /etc/ppp/options.pptpd

 

pass=`openssl rand 6 -base64`

if [ “$1” != “” ]

then pass=$1

fi

 

echo “vpn pptpd ${pass} *” >> /etc/ppp/chap-secrets

 

iptables -t nat -A POSTROUTING -s 172.16.36.0/24 -j SNAT –to-source `ifconfig | grep ‘inet addr:’| grep -v ’127.0.0.1′ | cut -d: -f2 | awk ‘NR==1 { print $1}’`

iptables -A FORWARD -p tcp –syn -s 172.16.36.0/24 -j TCPMSS –set-mss 1356

iptables -A RH-Firewall-1-INPUT -p tcp -m state –state NEW -m tcp –dport 1723 -j ACCEPT

iptables -A RH-Firewall-1-INPUT -p tcp -m state –state NEW -m tcp –dport 47 -j ACCEPT

 

service iptables save

chkconfig iptables on

chkconfig pptpd on

 

service iptables start

service pptpd restart

 

echo “VPN service is installed, your VPN username is vpn, VPN password is ${pass}”

VPN service is installed, your VPN username is vpn, VPN password is OBoyvanl

评论

发表评论

此博客中的热门博文

FreeBSD安装Pure-FTPd及user manager for PureFTPd

1、首先安装需要配置好apache2/mysql/php等服务！前面有过笔记。 2、安装pure-ftpd cd /usr/ports/ftp/pure-ftpd/ make with_language=simplified-chinese install clean;rehash 安装时，会有选择项；勾选： MYSQL Support for users in mysql database PRIVSEP Enable privileges separation PERUSERLIMITS Per-user concurrency limits THROTTLING Bandwidth throttling BANNER Show pure-ftpd welcome upon session start UTF8 Support for charset conversion (expreimental) 安装完成后 添加pureftpd_enable=”YES”到/etc/rc.conf文件中。 3、创建MySQL数据库，登陆mysql INSERT INTO mysql.user (Host, User, Password, Select_priv, Insert_priv, Update_priv, Delete_priv, Create_priv, Drop_priv, Reload_priv, Shutdown_priv, Process_priv, File_priv, Grant_priv, References_priv, Index_priv, Alter_priv, ssl_cipher, x509_issuer, x509_subject) VALUES(‘localhost’,’ftp’,PASSWORD(‘tmppasswd’),’Y’,’Y’,’Y’,’Y’,’N’,’N’,’N’,’N’,’N’,’N’,’N...
阅读全文

debian lighttpd php ssl

图片
apt update && sudo apt upgrade   apt-get install lighttpd   安装完成后，启动并启用该服务。 systemctl start lighttpd systemctl enable lighttpd apt-get install php php-cgi php-fpm php-mysql  nano /etc/php/*/fpm/php.ini  进行以下更改： cgi.fix_pathinfo=1(可将参数改为0)  file_uploads = On  upload_max_filesize = 100M  allow_url_fopen = On  short_open_tag = On  memory_limit = 256M  max_execution_time = 360  date.timezone = Africa/Nairobi  一旦进行了所需的更改，您需要将 Lighttpd 配置为使用 PHP-FPM 而不是默认的 PHP-CGI  进行以下更改： nano /etc/php/7.4/fpm/pool.d/www.conf listen = /run/php/php-fpm.sock  改为  listen = 127.0.0.1:9000  systemctl restart php*-fpm.service    现在修改 Lighttpd 配置以使用 PHP-FPM。  sudo vim /etc/lighttpd/conf-available/15-fastcgi-php.conf 在打开的文件中， 进行以下更改： 将  "bin-path" => "/usr/bin/php-cgi",  "socket" => "/var/run/lighttpd/php.socket",  改为  "host" => "127.0.0.1",  "port" => "9000",...
阅读全文

解决nginx出现File not found的问题

使用php-fpm解析PHP，”No input file specified”，”File not found”是令nginx新手头疼的常见错误，原因是php-fpm进程找不到SCRIPT_FILENAME配置的要执行的.php文件，php-fpm返回给nginx的默认404错误提示。 比如我的网站doucument_root下没有test.php，访问这个文件时通过抓包可以看到返回的内容。   HTTP/1.1 404 Not Found Date: Fri, 21 Dec 2012 08:15:28 GMT Content-Type: text/html Proxy-Connection: close Server: nginx/1.2.5 X-Powered-By: PHP/5.4.7 Via: 1.1 c3300 (NetCache NetApp/6.0.7) Content-Length: 16   File not found.   很多人不想用户直接看到这个默认的404错误信息，想自定义404错误. 给出解决办法前我们来先分析下如何避免出现这类404错误，然后再说真的遇到这种情况(比如用户输入一个错误不存在的路径)时该怎么办，才能显示自定义的404错误页。 一、错误的路径被发送到php-fpm进程 出现这类错误，十个有九个是后端fastcgi进程收到错误路径(SCRIPT_FILENAME)，而后端fastcgi收到错误路径的原因大都是配置错误。   常见的nginx.conf的配置如下： server { listen [::]:80; server_name example.com www.example.com; access_log /var/www/logs/example.com.access.log;   location / { root /var/www/example.com; index index.html index.htm index.pl; }   location /images { autoindex on; }   location ~ \.php$ { fastcgi_pass 127.0.0.1:...
阅读全文